PCC Series is a combination of MPPT technology and DSP controller system, it will convert best voltage to charge battery based on varied temperature. Compared to traditional solar charger controller, it allows your solar panels to operate at their optimum power output voltage, providing higher efficiency up to 97.7% with lower power loss.
PCC Series with inverter, solar panel, and external battery packs; it will become a standalone solar power system to generate green power for your home application. PCC Series will convert solar power to charge external batteries, and then provide power to home appliances via inverter. It's compatible to 4 different battery types, sealed lead acid, vented, gel and NiCd.
HOW IT WORK?
|MPPT Range @ Operating Voltage||15 ~ 33V @ 12V||30 ~ 66V @ 24V||60 ~ 132VDC|
|Maximum PV Array Open Circuit Voltage||50V||75V||150VDC|
|Nominal Battery Voltage||12V||24V||48V|
|Connected Battery Type||Sealed Lead Acid, Vented, Gel, NiCd Battery|
|Maximum Charging Current||25A||60A|
|Ripple Voltage||< ±1V|
|Stanby Power Consumption||1W||2W|
|Charging Method||Three Stages: Bulk, Absorption & Floating|
|Overload Protection||> 110%: Audiable Alarm||Yes|
|Polarity Reversal Protection @ Solar Cell & Battery||Yes|
|LCD Panel||LCD Panel indicating Solar Power, Output Power, Battery Voltage, Charging Current, and Fault Conditions|
|LED Display||Solar, Battery & Wiring Fault||Solar, Battery & Wiring Fault|
|Dimension (mm) D x W × H||135 x 170 x 57.5||220 x 170 x 57.5||180 x 210 x 80|
|Net Weight (kgs)||0.92||1.85||1.28|
|Connector||Input or Output Terminal Block|
|Type of Mechanical Protection||IP43||IP21|
|Humidity||0~90% Relative Humidity (non-condensing)|
|Operating Temperature||-20°C to 55°C|
|Storage Temperature||-40°C to 75°C|
|Altitude||0 ~ 3000m|
1 Year Warranty
Effective 1st April 2015, all goods and services may be subjected to GST 6% upon checkout.
subscribe and get special promotion updates
MCIL Multimedia Sdn.Bhd.(515740-D)
Copyright ©2016,Mykris Net MSC.
All Rights Reserved.