EURO-K.(MADE IN GERMANY) This product help to refuse Sub-Health Which is the solution to Superb Wellness Care for Diesel car- Keeps well the Diesel Supply System & Lubrication System away from wear and tear, Noisiness , aging and other Sub-Health Problems.
Inside the Euro-K box contain 3 Different bottles that does the work.
The 3 bottles are
OIL BOOSTER (200ml)
Exceeds the standards of the automobile manufacturers!
Oil Booster reduces oil and fuel consumption, reduces friction and wear and protects against rust and corrosion. The product prevents formation of deposits in the oil and lubrication system. Neutralises harmful engine acids, protects against hot silt and also prevents hardening of gaskets. Ensures smoother engine running and improves the viscosity of the oil throughout the complete temperature range. Oil Booster is optimized for usage in vehicles with particle filter, has reduced phosphate contents, uses ash-free ingredients and is free of heavy metals.
All petrol and diesel engines, transmissions and differentials.
Add to the new oil after every oil change.
200 ml sufficient for up to 8 litres oil. For larger oil volumes
add 50 ml Oil Booster per 1 litre oil.
Works during operation.
ENGINE FLUSH (350ml)
Free from chlorine, pbc, plump and cadmium.
Removes operationally caused contamination and resin deposits throughout the oil and lubrication system. The product dissolves residues and carbon from piston rings and from the upper cylinder area, neutralises harmful engine acids and protects the engine during flushing with powerful anti-friction lubricants.
For all petrol and diesel engines, manual transmissions and differentials, motorcycles and other high speed engines.
Add to the oil circulation system prior to oil change.
Allow the engine to idle for approx.15 minutes. After-wards carry out an oil change in accordance to the manufacturer’s instructions.
350 ml sufficient for up to 6 litres oil. For larger oil volumes
add 75 ml Engine Flush per 1 litre oil.
Approx. 15 minutes.
COMMON RAIL DIESEL SYSTEM CLEAN & PROTECT (300ml)
Common Rail Diesel System Clean & Protect is designed for all high-pressure diesel systems and direct injection such as Common-Rail, pump-injector etc. developed and designed for the specific requirements of high-tech products of the latest generation. Removes reliably and sustainably smallest particles of contamination in the whole system. Ensures optimum atomization and effect of the diesel fuel and ensures lubrication of the entire system, in particular the high-pressure pump. Ruined water drops in diesel fuel and absorbs combustion disturbing moisture. Especially recommended for Longlife Service intervals. Suitable for soot particle filters. Exceeds the HFRR test according to DIN EN ISO 12156-1.
For use in diesel powered engines with either common rail or pump-injector systems. Recommended for engines with particle filter, turbo and catalytic converter.
Fill directly into the diesel tank or us with special cleaning equipment.
while engine is running
300ml treats up to 80 liters Diesel. Mixing ratio: 1:200
<iframe width="640" height="360" src="https://www.youtube.com/embed/ZIzjv657F5Y?list=PLXDhKrv4bcsUxI2D8f492NGtf5vrJ0oyw" frameborder="0" allowfullscreen></iframe>
Effective 1st April 2015, all goods and services may be subjected to GST 6% upon checkout.
MCIL Multimedia Sdn.Bhd.(515740-D)
Copyright ©2017,Mykris Net MSC.
All Rights Reserved.