MicroSD Card Interface Board for Arduino/Rsapberry Pi Controller Board. Not just a simple breakout board, this microSD adapter goes the extra mile – designed for ease of use.

To use with an Arduino, connect GND to ground, 5V to 5V, SCK to pin 13, MISO to pin 12, MOSI to pin 11, and CS to pin 10. Then you can use the Arduino IDE’s SD library which supports FAT16 and FAT32 SD cards.

Image is for package illustration purpose only. Refer to product specs for detail.

Product Details

  • Onboard 5V > 3V regulator provides 150mA for power-hungry cards.
  • 3V level shifting means you can use this with ease on either 3V or 5V systems.
  • Uses a proper level shifting chip, not resistors: less problems, and faster read/write access.
  • Use 3 or 4 digital pins to read and write 2Gb+ of storage!
  • Four #2mm mounting holes.
  • Push-push socket with card slightly over the edge of the PCB so its easy to insert and remove.
  • Comes with 0.1″ right angle header pins so you can get it on a breadboard or use wires.
  • Works great with Arduino, with tons of example code and wiring diagrams.

Additional Information:

> Schematic Diagram

> Arduino Interfacing Tutorial



T & C

We warrant Handson Technology Manufactured Products will be free from manufacturing defects for a period of thirty (30) days following the date of delivery to you. We will replace, repair or credit you for any confirmed defective product at our option. Products that are not manufactured by Handson Technology may, or may not, be covered by original manufacturer’s warranty and passed through to you. Please contact support to confirm warranty period prior to purchase.

Warranty will not apply if Product fails or is damaged after delivery to you due to accident, abuse or misuse.


Share Product

Link Embed
RM 4.80
Sold and fulfilled by:
Shipment and Delivery: 2-3 Business Days
Ship To: Refer to T&C
Brand: OEM
SKU: microsd1189
Order Quantity
In Stock