Description

Kingston 4GB 240-Pin DDR3 SDRAM DDR3 1333 PC Ram SR x8 STD Height 30mm Model KVR13N9S8H/4

Kingston KVR13N9S8H/4 4GB 1Rx8 512M x 64-Bit PC3-10600 CL9 240-Pin DIMM

DESCRIPTION

This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB: Height 1.18” (30mm), single sided component

Specifications:
CL(IDD): 9 cycles
Row Cycle Time (tRCmin): 49.5nc (min.)
Refresh to Active/ Refresh Command Time (tRFCmin): 260ns (min.)
Row Active Time (tRASmin): 36ns (min.)
Maximum Operating Power: 2.100 W*
UL Rating: 94 V – 0
Operating Temperature: 0°C to 85°C
Storage Temperature: -55°C to +100°C
*Power will vary depending on the SDRAM used.

kingston-KVR13N9S8H-4.jpg

What's in the Box:

  • Kingston 4GB 240-Pin DDR3 SDRAM

Product Details

FEATURES

  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB: Height 1.18” (30mm), single sided component

Specifications:
CL(IDD): 9 cycles
Row Cycle Time (tRCmin): 49.5nc (min.)
Refresh to Active/ Refresh Command Time (tRFCmin): 260ns (min.)
Row Active Time (tRASmin): 36ns (min.)
Maximum Operating Power: 2.100 W*
UL Rating: 94 V – 0
Operating Temperature: 0°C to 85°C
Storage Temperature: -55°C to +100°C
*Power will vary depending on the SDRAM used.

T & C

Model KVR13N9S8H/4
Size (L x W x H) 50x24x10 (MM)
Color Green
Warranty Period Life Time Warranty
Warranty Type Local Manufacturer Warranty

Share

Share Product

Link Embed
Close
RM 135.00
32%
Sold and fulfilled by:
Shipment and Delivery: Next Business Day
Ship To: Refer to T&C
Brand: Kingston
SKU: Kingston-KVR13N9S8H/4