Product Highlights

  • 16GB Desktop RAM
  • DDR3 1600MHz
  • 9 Cycles (CL)
  • Row Cycle Time (tRCmin) - 48.125ns (min.)
  • Voltage 1.5V
  • Asymmetric heat spreader for stylish heat dissipation
  • Operating Temperature 0° C to 85 ° C
  • 133.35mm x 33.3mm x 7.90mm


What's in the b& 111x: 

  • 1 x Kingston 16GB HyperX Savage Red DDR3 RAM


Feature Highlights

     HyperX HX316C9SR/8 is a 1G x 64-bit (8GB) DDR3-1600 CL9 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M      x 8-bit FBGA components per module. Each module supports Intel® XMP (Extreme Memory Profiles). Each module has been t& 101sted to run        at DDR3-1600 at a low latency timing of 9-9-9 at 1.5V. The SPDs are programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11      at 1.5V. Each 240-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:


        â€¢ JEDEC standard 1.5V (1.425V ~ 1 575V) Power Supply
        • VDDQ = 1.5V (1.425V ~ 1.575V)
        • 800MHz fCK for 1600Mb/sec/pin
        • 8 independent internal banks
        • Programmable CAS latency: 11, 10, 9, 8, 7, 6
        • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
&# 8nbsp;       • 8-bit pre-fetch
        • Burst Length: 8 (interleave without any limit, sequential with
          starting address “000” only), 4 with tCCD = 4 which does not
          allow seamless read or write (either on the fly using A12 or MRS)
      & 0bsp; • Bi-directional Differential Data Strobe
        • Internal (self) calibration: Internal self calibration through ZQ
           pin (RZQ: 240 ohm ± 1%)
        • On Die Termination using ODT pin
        • Average Refresh Period 7.8us at lower than TCASE 85°C,
&nbs 2;         3.9us at 85°C        • Asynchronous Reset
        â€¢ Height 1.311” (33.30mm), w/heatsink, double sided component




Share Product

Link Embed
RM 438.00
Sold and fulfilled by:
Shipment and Delivery: 2-3 Business Days
Ship To: Refer to T&C
Order Quantity
In Stock