Description

Overview

 

The DVG-N5412SP is designed to carry both voice and facsimile over the IP network and wirelessly share Internet access. It uses the industry standard SIP call control protocol so as to be compatible with free registration services or VoIP service providers’ systems. As a standard user agent, it is compatible with all common Soft Switches and SIP proxy servers. While running optional server software, the VoIP Router can be configured to establish a private VoIP network over the Internet without a third-party SIP Proxy Server.

 

The DVG-N5412SP can be seamlessly integrated into an existing network by connecting to a phone set and fax machine. With only a broadband connection such as an ADSL bridge/router, a Cable Modem or a leased-line router, the VoIP Router allows you to use voice and fax services over IP in order to reduce the cost of all long distance calls.

 

The DVG-N5412SP is also an 802.11b/g/n wireless access point. Allow wireless clients to connect to it and share your broadband Internet connection. A built-in 4-port switch makes it possible to connect up to 4 Ethernet-enabled computers or devices to also share your Internet connection. The DVG-N5412SP can be configured a fixed IP address or it can have one dynamically assigned by DHCP or PPPoE. It adopts either the G.711, G.726, G.729A, G.723.1 or iLBC voice compression format to save network bandwidth while providing real-time, toll quality voice transmission and reception.

 

Product Description

 

Power: Power LED. A steady light indicates a proper connection to a power source. Prov./Alm.: A blinking light indicates the DVG-N5412SP can not register with SIP Server or can not get the IP address. A blinking light also indicates the DVG-N5412SP is attempting to connect with the Provisioning server. Once the service connects, the LED will turn off. The LED will light solid red if the self-test or boot-up fails.

 

REG.: The Register LED will turn on and continuously working when DVG-N5412SP is connected to a VoIP service provider. The LED will flash if not connected to a service provider.

 

WAN: When a connection is established the LED will light up solid. The LED will blink to indicate activity. If the LED does not light up when a cable is connected, verify the cable connections and make sure your devices are powered on.

 

WLAN: A steady light indicates a wireless connection. A blinking light indicates that the VoIP Router is receiving/transmitting from/to the wireless network.

 

LAN: When a connection is established the LED (bottom) will light up solid on the appropriate port. The LEDs will blink to indicate activity. If the LED does not light up when a cable is connected, verify the cable connections and make sure your devices are powered on.

 

USB: This indicates that DVG-N5412SP detects a supported 3G modem dungle or a USB device.

 

Phone: This LED displays the VoIP status and Hook/Ringing activity on the phone port that is used to connect your normal telephone(s). If a phone connected to a phone port is off the hook or in use, this LED will light solid. When a phone is ringing, the indicator will blink.

 

Line: Light on means the line is in use (off-hook), and vice versa.

 

WPS: Flashing in blue as DVG-N5412SP processing WPS-PBC wireless connecting progress. 

 

Package Contents

  • 1 x Wireless Router
  • 1 x Quick Guide
  • 2 x LAN Cable
  • 1 x stand
  • 1 x Power Adaptor


1 Year Warranty

Product Details

Overview

 

The DVG-N5412SP is designed to carry both voice and facsimile over the IP network and wirelessly share Internet access. It uses the industry standard SIP call control protocol so as to be compatible with free registration services or VoIP service providers’ systems. As a standard user agent, it is compatible with all common Soft Switches and SIP proxy servers. While running optional server software, the VoIP Router can be configured to establish a private VoIP network over the Internet without a third-party SIP Proxy Server.

 

The DVG-N5412SP can be seamlessly integrated into an existing network by connecting to a phone set and fax machine. With only a broadband connection such as an ADSL bridge/router, a Cable Modem or a leased-line router, the VoIP Router allows you to use voice and fax services over IP in order to reduce the cost of all long distance calls.

 

The DVG-N5412SP is also an 802.11b/g/n wireless access point. Allow wireless clients to connect to it and share your broadband Internet connection. A built-in 4-port switch makes it possible to connect up to 4 Ethernet-enabled computers or devices to also share your Internet connection. The DVG-N5412SP can be configured a fixed IP address or it can have one dynamically assigned by DHCP or PPPoE. It adopts either the G.711, G.726, G.729A, G.723.1 or iLBC voice compression format to save network bandwidth while providing real-time, toll quality voice transmission and reception.

 

Product Description

 

Power: Power LED. A steady light indicates a proper connection to a power source. Prov./Alm.: A blinking light indicates the DVG-N5412SP can not register with SIP Server or can not get the IP address. A blinking light also indicates the DVG-N5412SP is attempting to connect with the Provisioning server. Once the service connects, the LED will turn off. The LED will light solid red if the self-test or boot-up fails.

 

REG.: The Register LED will turn on and continuously working when DVG-N5412SP is connected to a VoIP service provider. The LED will flash if not connected to a service provider.

 

WAN: When a connection is established the LED will light up solid. The LED will blink to indicate activity. If the LED does not light up when a cable is connected, verify the cable connections and make sure your devices are powered on.

 

WLAN: A steady light indicates a wireless connection. A blinking light indicates that the VoIP Router is receiving/transmitting from/to the wireless network.

 

LAN: When a connection is established the LED (bottom) will light up solid on the appropriate port. The LEDs will blink to indicate activity. If the LED does not light up when a cable is connected, verify the cable connections and make sure your devices are powered on.

 

USB: This indicates that DVG-N5412SP detects a supported 3G modem dungle or a USB device.

 

Phone: This LED displays the VoIP status and Hook/Ringing activity on the phone port that is used to connect your normal telephone(s). If a phone connected to a phone port is off the hook or in use, this LED will light solid. When a phone is ringing, the indicator will blink.

 

Line: Light on means the line is in use (off-hook), and vice versa.

 

WPS: Flashing in blue as DVG-N5412SP processing WPS-PBC wireless connecting progress. 

 

Package Contents

  • 1 x Wireless Router
  • 1 x Quick Guide
  • 2 x LAN Cable
  • 1 x stand
  • 1 x Power Adaptor


1 Year Warranty

T & C

Please keep invoice for warranty

Share

Share Product

Link Embed
Close
RM 199.00
5%
Sold and fulfilled by:
Shipment and Delivery: 2-3 Business Days
Ship To: Refer to T&C
Brand: D-Link
SKU: D-Link DVG-N5412SP N300 Wireless VOIP Router
 
Order Quantity
      
In Stock