Description

CRAZY DEAL ELM327  OBD ELM Bluetooth  OBD2 scanner CAR Diagnostic

  (Support Android and Symbian)

 

 
 2014 LATEST VERSION ~
 
MAKE SURE IS ELM327 CHIPSET BEFORE  PURCHASE !!!!!

 

 


 

   

Size

(M205)

8cm x 4.3cm

(M207)

3.5cm x 4.3cm

(M209)

6.7cm x 4.3cm

SUPER M808 & SUPER WHITE M808

4.5cm x 4.3cm

Firmware Version

1.3/1.4v

1.5v

1.5v

1.5v

Pros

-

Smallest in size

With LED Indicator

Contains new implanted OBD2 chip.

Cons

Large in size

Switching other obd2 devices causes bluetooth confusion.

Get hot easily due to the led indicator, can’t be used for long diagnose more than 5hours.

Slightly bigger 1cm compared to the mini ones.

Remarks

Big in size, would block the driver’s foot during driving, especially for those obd2 connectors located near to the leg.

Beautiful LED light indicator. Also means produces more heat and consuming more power.

Good for drivers with obd2 located near to the leg, does not obstruct driving, produces less heat.

 

 

 

 

LED indication is beautiful, but it means using up more power and higher heat produced. 

 

Big in size, would obstruct driver’s foot during driving.

 

 

Although slightly bigger than the mini ones, it still does not obstruct your leg during driving.

 

New elm chip provides the ability to diagnose more vehicles, including Peugeot 308T, stable voltage and much accurate PID readings.

 

Each obd2 device is separated with its own serial number, thus would not confuse your bluetooth connectivity whenever switched to another vehicle.

 NOTE ~ SUPER M808 N WHITE M808 IS SAME (JUST WHITE 808 SMALLER)



 
CLICK FOR VIDEO DEMO!!!!!!!!

 
The ELM327 is our multi-function OBDII Interpreter IC. It provides an RS232 to OBDII data bridge for systems that use the ISO 15765-4 CAN, SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 and SAE J1939 protocols. In addition, we provide two generic CAN protocols that can be customized by the user for use with audio data busses, special OBD implementations, etc.

It would seem that the previous version (1.3a) offered all that anyone could need in an OBD interpreter, but we've managed to find several new features to put into the new ELM327 v1.4b chip. The data sheet explains all of these features in detail, but here's a quick listing of some of the changes: 

 

  • Power Control provides a very low power standby mode

  • More J1939 support

  • A non-volatile memory location for storing user data

  • An option to turn off the CAN silent monitoring for bench testing, or when connecting to a dedicated CAN port

  • CAN extended addressing support for experimenting with special data formats

  • The ISO/KWP bus initializations may now be performed without having to send a request

  • A 4800 baud ISO option, to compliment the 10400 and 9600 rates

  • An SS command for searching sequentially through the protocols

  • A TA command to change the Tester Address without using a PP

  • The ability to quickly restore the factory calibration for the voltage reading circuit



  •  
  •  

In addition, there have been several improvements made 'under the hood', which will help with the overall reliabilty. Download either the 'QuickSheet' (a 7 page summary), or the full (76 page) Data Sheet for a more complete description of what it is now capable of. We are often asked about the differences between versions of the ELM327, as it has been updated several times. The AT Commands file provides a summary of these
Overview:  
ELM327 Bluetooth CAN-BUS scan tool supports OBD-II protocols. It is used to read & diagnose trouble codes, clear trouble codes and detect fuel pressure and so on.
 
Features: 
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

  Clear trouble codes and turn off the MIL ("Check Engine" light).

  Display current sensor data, including:

   Engine RPM

* Calculated Load Value

 * Coolant Temperature

 * Fuel System Status

 * Vehicle Speed

 * Short Term Fuel Trim

 * Long Term Fuel Trim

 * Intake Manifold Pressure

 * Timing Advance

 * Intake Air Temperature

 * Air Flow Rate

 * Absolute Throttle Position

 * Oxygen sensor voltages/associated short term fuel trims

 * Fuel System status

 * Fuel Pressure

  Specifications:

 

Support OBD-II protocols as follows:

  * ISO15765-4 (CAN)

  * ISO14230-4 (KWP2000)

  * ISO9141-2

  * J1850 VPW

  * J1850 PWM

 

Dimensions: 7 * 4.5 * 2.5cm

 

 Net weight: 43g

  Total weight: 50g

 

 Compatibility:

  * Works on all OBD2 Vehicles ( from 1996 in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)

 

 * Compatible with Android Torque and Windows Smartphone, Windows PC.

Packing List:

 

1 * ELM327 unit (Bluetooth version)
1 * CD drive
 
Tested Compatible vehicles:


 
Benz2001/02/03W203 C200K  AND 99% MAKE AFTER 2000 BENZ(ISO)


 
BMW E46,E39,E60 AND 99% MAKE AFTER 1999 BMW   (ISO)
 
 
Chevrolet Aveo (ISO)


 
Citroen C3 2004 (ISO) ? Daihatsu YRV 2005 (ISO)


 
Daihatsu YRV Turbo 2006 (ISO)


 
Fiat Tipo 2002 (ISO) 


 
Ford New Focus 2006(CAN)

99% HONDA MAKE AFTER 2001 CAN SUPPORT
 
Honda Accord 2006 JDM (ISO)


 
Honda Accord Euro R 2004 JDM (ISO)


 
Honda City GD8 (ISO)


 
Honda Civic ES 1.6A (ISO)


 
Honda City Vtec


 
Honda Insight


 
Honda Integra Type R DC5 JDM (ISO)


 
Honda Jazz 1.4M (ISO)


 
Hyundai Accent 2004 (ISO)


 
Hyundai Getz 1.3A 2004 (ISO)


 
Hyundai Getz 1.6M 2004 (ISO)


 
Hyundai Matrix 2004 (ISO)


 
Hyundai Accent


 
HyundaiSanta Fe2.4A (ISO)


 
Hyundai Sonata GLS (ISO)


 
Hyundai Sonata 2005 (ISO)


 
Hyundai Tuscani FX (ISO)


 
Kia Carens 2005 (ISO)


 
Kia Magentis 2005 (ISO)


 
KiaRioLS (ISO)


 
Kia Sorento SUV 2005 (ISO)


 
Lexus es300 Mazda 2 (CAN)


 
Mazda 5 (CAN)


 
Mazda 6 (CAN)


 
Mazda Premacy 2001 (ISO)


 
Mazda RX8 (CAN)


 
Mitsubishi Colt 2003 (ISO)


 
Mitsubishi Colt Plus 2005 (ISO)

Mitsubishi    4G93 GDI (ISO)
 
Mitsubishi Eclipse(GST-----Turbo Car can be tested for the year 1995-2000;RS/GS----1994-1996 GS all can do;Turbo Car for the year 1996-2000,only have speed and TPS,can clear the DTCS)


 
Mitsubishi Lancer Evolution IX 2006 (ISO)


 
Mitsubishi Pajero 3.5 V6 2006 (ISO)


 
Nissan Sunny B14 (ISO)


 
Nissan Sunny VIP FB15 (ISO)


 
Nissan X-Trail 2.0L 2004 (ISO)


 
Nissan X-Trail 2.5L 2004 (ISO)


 
Peugeot 206 2001 –Only can show RPM


 
Peugeot 206 (ISO)


 
Peugeot 307 (ISO)


 
Peugeot 407 (ISO)


 
Proton Inspira 2011 1.8/2.0


 
Proton Savvy 2008 1.2 AMT 

Proton Exora Bold CFE

Proton Persona Elegance

Proton Preve 2012
 
Proton Waja 1.8
 
 
Renault Megane II 2005 (ISO)


 
Renault Kangoo 2006 (ISO)


 
Subaru Impreza 1.6TS 2002 (ISO)


 
Subaru Impreza WRX 2005 (ISO)


 
ToyotaCamry 2.0A 2004 (ISO)


 
ToyotaCamry 2.4A 2005 (ISO)


 
ToyotaCorolla Altis 1.6A 2005 (ISO)


 
ToyotaCorolla GLXi G8 1999 (ISO)


 
ToyotaCorolla G9 2002 (ISO)


 
ToyotaVios 2004 (ISO)


 
Chevrolet Cruze 


 
 


 
Other tested compatible vehicle list can be viewed here: 
 
 


 
 


 
 


 
Not available vehicles:


 
Nissan Sunny (N16)


 
Nissan Cefiro (Teana) 2005


 
Proton Perdana V6


 
Proton Saga


 
Proton Wira


 
Perodua Myvi


 
Perodua Alza


 
Subaru Legacy GT 2005


 
Toyotacamry 2002


 
ToyotaWish JDM (Missing Pin 5 in DLC)


 
ToyotaIST JDM (Missing Pin 5 in DLC

 

 

 

PLS CHECK THE LATEST CAR MODEL VIA LINK BELOW

 http://www.2shared.com/file/ksAU9zOE/OBDII_scantool_usage_statistic.html

Share

Share Product

Link Embed
Close
RM 44.90
65%
Sold and fulfilled by:
Shipment and Delivery: Next Business Day
Ship To: Refer to T&C
Brand:
 
Order Quantity
      
In Stock